The highly fluctuating AC mains supply is very common phenomenon in India. The difficulties caused by them are known too well and need not be enumerated. Unsteady voltage supply conditions result in total breakdowns of sensitive and sophisticated equipments. To ensure the stabilized voltage, SYSTEMS CREATOR have developed the Servo Controlled Voltage Stabilizer confirms to IS 9815.
Features : |
|
 |
High power efficiency > 95% |
|
Ultra fast correction rate 44V / sec |
|
+1% regulation from no load to full load |
|
Waveform distortion NIL |
Wider rang of input voltage: |
|
|
For single phase: 170V - 270V, 150V -270V (optional) |
|
For three phase : 360V - 460V, 300V - 460V (optional) |
Output voltage : |
|
|
For single phase: 230V + 1%, 220V + 1% |
|
For three phase: 415V + 1%, 400V + 1% |
|
Built in Line Fault Indicator |
|
Under voltage / over voltage cut off with indication. |
|
Over load protection |
|
Spike Suppressor (optional) |
|
Auto / manual selection (optional) |
|
Single phase preventor (optional) |
|
Delay start to avoid initial surges (optional) |
|
Phase reversal protection (optional) |
Single phase
Model |
Rating |
load |
SC 101 I |
1KVA |
4Amp |
SC 201 I |
2 KVA |
8Amp |
SC 301 I |
3 KVA |
12Amp |
SC 401 I |
4 KVA |
16Amp |
SC 501 I |
5 KVA |
20Amp |
SC 751 I |
7.5 KVA |
28Amp |
SC 1001 I |
10 KVA |
40Amp |
SC 1501 I |
15 KVA |
60Amp |
SC 2001 I |
20 KVA |
80Amp |
Three phase
Model |
Rating |
Max load Per phase |
SC 303 I |
3KVA |
4Amp |
SC 603 I |
6 KVA |
8Amp |
SC 903 I |
9 KVA |
12Amp |
SC 1203 I |
12 KVA |
16Amp |
SC 1503 I |
15 KVA |
20Amp |
SC 3003 I |
30 KVA |
40Amp |
SC 4503 I |
45KVA |
60Amp |
SC 6003 I |
60 KVA |
80Amp |
*SC 7503 I |
75 KVA |
100Amp |
*SC 15003 I |
150 KVA |
200Amp |
*Oil Cooled
| Application : |
Medical equipment, Industrial Machines, Motors, CNC Machines, Laser Machines, and Inductive load. |
Used at : |
Factories, shops, laboratories.
|
SYSGEN ® works on battery. During mains fails it draws power from batteries & supplies to connected load. As soon as mains restore, SYSGEN® stops drawing power from batteries & start recharging them.
Features : |
|
|
Fully automatic
|
|
Absolutely pollution free |
|
Noiseless |
|
No fuel required |
|
Low operating cost |
Technical specification:
Input |
Voltage |
230+15% for line & charger |
Frequency |
50Hz + 2% |
|
Output |
Voltage |
240+ 8% for square wave & |
Frequency |
50Hz + 2% |
|
Wave from |
Square & Sine wave |
|
Transfer |
Mains to inverter Inverter to mains |
120VAC |
Indication |
All visual (LEDS) |
Mains ON, Inverter ON, Battery Low, overload, charging ON |
Protection |
Inverter |
Overload, Short circuit, |
Charger |
Current limit & overcharge |
|
General |
Output fused |
|
Efficiency |
Approx |
85% |
MODELddd |
SYSGEN |
SYSGEN |
SYSGEN |
SYSGEN |
SYSGEN |
SYSGEN |
SYSGEN |
SYSGEN |
Rated load |
2T+2F |
3T+3F |
4T+4F |
6T+6F |
8T+8F |
12T+12F |
16T+16F |
24T+24F |
Battery voltage |
12V |
12V/24V |
12V/24V |
24V |
24V/36V |
36V/48V |
48V |
72V |
Discharge current |
20AMP |
30/15A |
40/20A |
25A |
40/30A |
40/30A |
40A |
40A |
INVERTOR WITH SINE WAVE OUTPUT :
MODEL |
SYSGEN |
SYSGEN |
SYSGEN |
SYSGEN |
SYSGEN |
SYSGEN |
BATTERY VOLTAGE |
12V |
24V |
24V |
24V |
48V |
120V |
Discharge Current |
30Amp |
30Amp |
40Amp |
55Amp |
62Amp |
40Amp |
Application : |
Tube light, fan, TV, refrigerator, weighing scale, PUC machine. |
Used at : |
Home, Shops, Showrooms, Godowns, Factories, PUC Van, Cyber – café, School/Collages, Coaching classes. |
AC mains, powers the input winding which is widely separated physically from the Isolated output winding. The input winding normally runs at very moderate flux linkage levels. The output winding exhibits an intrinsic energy storage characteristic and this energy storage operates in conjunction with the mains capacitors to produce self generated AC flux field which is indirectly excited from the input winding.
SYSTEMS CREATOR'S CVT gives instantaneous voltage regulation. No transient and spikes. Pure sine wave output. A perfect solution for every electronic equipments against voltage problems
Specifications : |
|
|
Input Voltage range : 180V - 260V |
|
Output Voltage : 220V / 230V + 1% |
|
Efficiency : 95% (appx) at full load |
|
Waveform distortion : Nil |
|
Load and line regulation : + 1% |
|
Voltage correction rate : Ultra fast |
Application : |
Computers, Electrical equipment, Medical equipment, CNC machine & moulding machine. |
Copyright © 2015, SYSTEMS CREATOR | ALL Right Reserved
